SAMMI 2 Inch (50mm) Throat Bolt on Titanium Horn driver (SM3201)
The imported SAMMI SM3201 is an imported high performance 2.0″ (50mm) throat, bolt on high-frequency compression driver for use as a high frequency component in a professional high quality sound reinforcement and reproduction applications.
The SAMMI SM3201 is an imported high performance 2″ throat bolt on ferrite magnet compression type high-frequency driver for use as a high frequency component in professional high quality sound reinforcement and reproduction applications. The SM3201 offers exceptional high frequency performance:
High acoustic output 110 dB/1w/1m when coupled with the SH450 flare.
Wide frequency range 500Hz to 18KHz when coupled with the SH450 flare.
80watt power handling above 800Hz .
When attenuated to a typical sensitivity of 100dBSPL the input power handling at the network input terminals is 800W relative to 2.83v/8-ohm reference.
This unit must be connected to a system via a frequency selective device the “crossover” which may be passive or active-electronic type. We recommend a minimum 12dB/octave high- pass filter, above 800Hz. Refer to our computer-aided design filter networks which are designed to meet specific target response. In demanding applications a higher cut-off and also higher order network is recommended and necessary.
We chose the SAMMI SM3201 horn driver in our speaker systems due to its excellent overall performance.
- Throat size: 2″/50 mm
- Voicecoil Diaphragm: 72mm)
- Nominal impedance: 8 ohm
- Voice Coil DC Resistance: 5.0 ohm
- Power Handling: 80 watt
- Sound Pressure Level (1W@1M): 110 dB (SH450 horn)
- Frequency range: 500Hz – 18kHz (SH450 horn flare)
- Mounting Type: Bolt on
- Mounting threads: 4 x 0.25 Inch -20UNC on 101mm PCD
- Magnet: High Quality Ferrite
- Diaphragm Material: Titanium
- Recommended Crossover: 800 Hz or higher((12dB/Oct)
- Net Weight: 5.22kgm
Only logged in customers who have purchased this product may leave a review.