SAMMI 1 Inch (25.4mm) Bolt on Titanium Horn Driver (SM-35T)
The imported SAMMI SM-35T is a compact economical, efficient, ferrite magnet 1” throat phenolic diaphragm high frequency compression driver designed for sound reinforcement and musical instrument applications in the frequency range 2Khz to 16KHz. This unit employs screw on mounting and delivers a high sensitivity of 104 dBSPL combined with 35 watt power handling. The construction makes this horn driver water-proof.
The imported SAMMI SM-35T is a an economical efficient ferrite magnet 1” throat phenolic diaphragm high frequency compression driver designed for sound reinforcement and musical instrument applications in the frequency range 2Khz to 16KHz. This unit employs a cast aluminum body and delivers a high sensitivity of 104 dBSPL combined with 35 watt power handling thereby delivering exceptional high end performance in a compact package.. This driver employs a 35mm diameter copper-clad aluminum voice coil wound unto a Kapton bobbin. The driver attaches to the horn flare via a 1 3/8-18UNEF thread.
This unit must be connected to a system via a frequency selective device the “crossover” which may be passive or active-electronic type. We recommend a minimum 12dB/octave high-pass filter, refer to our computer-aided design filter networks which are designed to meet specific target response, however in demanding applications a higher order network is recommended and necessary. The use of non-optimized networks may result in inferior performance.
The diaphragm is terminated with 5.0mm spade terminals, observe polarity.
Specifications
- Throat size: 1″/25.4 mm
- Diaphragm diameter: 35 mm
- Nominal impedance: 8 ohm
- Voice Coil DC Resistance: 6.8 or 16 ohm
- Power Handling: 35 watt above 1.5kHz
- Sound Pressure Level (1W@1M): 104 dB
- Frequency range: 1500Hz – 16kHz (SH150 horn flare)
- Mounting Type: 1 3/8″ -18 UNEF tread connection
- Magnet: High Quality Ferrite
- Diaphragm Material: Phenolic
- Recommended Crossover: 2.0kHz or higher((12dB/Oct)
- Net Weight: 1.45 kgm
Downloads
- SAMMI SM -35T Datasheet
- Repair Kit Available R-SM-35T
- Available in 8 or 16 ohm impedance
Only logged in customers who have purchased this product may leave a review.
Reviews(0)
There are no reviews yet.