PAudio 2 Inch (50mm) Throat Bolt on Titanium Horn driver (BM-D750)

The imported PAudio BM-D740 is a high performance 1.4″ (35.5mm) throat, bolt on high-frequency compression driver for use as a high frequency component in a professional high quality sound reinforcement and reproduction applications. The BM-B740 offers exceptional high frequency performance producing high acoustic output at 110 dB/1w/1m when coupled to a suitable flare. Wide frequency range 500Hz to 20kHz when coupled to a large format flare and a high 100 watt power handling above 800Hz. When attenuated to a typical sensitivity of 100dBSPL this implies and input power handling at the network input terminals of 1000W relative to 2.83v/8-ohm reference.

The compression driver must be connected to a system via a frequency selective device the “crossover” which may be passive or active-electronic type. We recommend a minimum 12dB/octave high-pass filter at 800Hz or higher, refer our computer-aided design filter networks which are designed to meet specific target response, however in demanding applications a higher order network is recommended and necessary. The use of a non-optimized crossover may result in inferior and often unreliable performance.

We chose use the PAudio BM-D740 in our speaker systems due to its excellent overall performance and reliability.

Specifications

• Throat size:  2″/50 mm
• Diaphragm diameter: 3.0 inch (76mm)
• Nominal impedance: 8 ohm
• Voice Coil DC Resistance: 6.3 ohm
• Power Handling: 100 watt
• Sound Pressure Level (1W@1M): 109 dB (SH450 horn)
• Frequency range: 500Hz – 19kHz (SH450 horn flare)
• Mounting Type: Bolt on
• Mounting threads: 4 x 6mm on 101mm PCD
• Magnet: High Quality Ferrite
• Diaphragm Material: Titanium
• Recommended Crossover: 800 Hz or higher(12dB/Oct)
• Net Weight: 

Downloads

• PAudio BM-D750  Datasheet
• Repair Kit Available RBM-D750