+61 (03) 9791 5971

Social

×
Your cart is empty.
SAMMI 1 Inch (25.4mm) Bolt on Titanium Horn Driver (SM107

SAMMI 1 Inch (25.4mm) Bolt on Titanium Horn Driver (SM107

The SAMMI SM107 is an imported high performance 1″ throat compression type high-frequency driver for use as a high frequency component in professional high quality sound reinforcement and reproduction applications. The SM107 offers exceptional high frequency performance,  high acoustic output 106dB/1W/1m when coupled to the SH402 flare and wide frequency range 800Hz to 17KHz.

The SAMMI SM107 is an imported high performance 1″ throat compression type high-frequency driver for use as a high frequency component in professional high quality sound reinforcement and reproduction applications. The SM107 offers exceptional high frequency performance: High acoustic output 106dB/1W/1m when coupled to the SH402 flare. Wide frequency range 800Hz to 17KHz when coupled to the SH402 flare. 50watt power handling above 800Hz . When attenuated to a typical sensitivity of 100dBSPL the input power handling at the network input terminals is 200W relative to 2.83v/8-ohm reference.

 This unit must be connected to a system via a frequency selective device the “crossover” which may be passive or active-electronic type. We recommend a minimum 12dB/octave high- pass filter, refer our computer-aided design filter networks which are designed to meet specific target response, however in demanding applications a higher order network is recommended and necessary
This driver is a bolt-on type and three equi-spaced 0.25″20UNC threaded holes on a 57mm PCD are provided. Additionally two 0.25″ -20UNC threaded holes on a 76mm PCD.
The diaphragm is terminated with push spring terminals, observe polarity.

Specifications

  • Throat size: 1″/25.4 mm
  • Diaphragm diameter: 1.75 inch (44.4mm)
  • Nominal impedance: 8 ohm
  • Voice Coil DC Resistance: 5.0 ohm
  • Power Handling: 50 watt
  • Sound Pressure Level (1W@1M): 106 dB
  • Frequency range: 500Hz – 15kHz (SH402 horn flre)
  • Mounting Type: Bolt on
  • Mounting threads: 3 x 1/4″ UNC on 57mm PCD
  • Mounting Threads: 2 x 1/4″ UNC on 76mm PCD
  • Magnet: High Quality Ferrite
  • Diaphragm Material: Titanium
  • Recommended Crossover: 1.5kHz or higher((12dB/Oct)
  • Net Weight: 2.5kgm

Downloads

Reviews(0)

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Call Now Button