1 Inch (25.4mm) throat 80 x 40 Dispersion Screw-On Horn Flare (H-1560)
AUD $47.00 (Ex. GST)
The H1560 is a compact imported 1” throat screw-on horn flare with an 1100Hz cut-off, 80o horizontal coverage and 40o vertical coverage. The horn flare attaches to the horn driver via a 1 3/8 -18UNEF brass screw insert.
The H1560 is a compact imported 1” throat screw-on horn flare with an 1100Hz cut-off, 80o horizontal coverage and 40o vertical coverage. The horn flare attaches to the horn driver via a 1 3/8 -18UNEF brass screw insert. The horn is manufactured from low mass tough synthetic resin material selected for its excellent strength while providing self-damping properties. This horn maintains even horizontal coverage and narrowing vertical coverage but still maintains 40 degree vertical coverage at 12kHz.
Specifications
- Throat size: 1″/25 mm
- Dispersion: 80 x 40
- Cutoff frequency: 1100 Hz
- Mounting type: 1 3/8 -18UNEF Screw on
- Construction: A.B.S. Polymer with glass fiber
- Net Weight: 0.57 kgm
- Overall width: 385 mm
- Overall height: 130 mm
- Overall depth: 155 mm
Downloads
Additional information
| Weight | 0.7 kg |
|---|---|
| Dimensions | 39.5 × 14 × 16.5 cm |
Only logged in customers who have purchased this product may leave a review.
PAudio 1.4 Inch (36mm) throat 80 x 50 Dispersion Bolt-On Flare (PH-85)
The PAudio PH-85 is a constant directivity flat fronted horn flare with a rectangular mouth geometry. The horizontal dispersion is 80 degree and vertical angle 50 degree. The PH-85 is recommended for modern professional high acoustic output sound reinforcement systems where a low profile design and short vertical height are required.
The PAudio PH-85 is a constant directivity flat fronted horn flare with a rectangular mouth geometry. The horizontal dispersion is 80 degree and vertical angle 50 degree. The PH-85 is recommended for modern professional high acoustic output sound reinforcement systems where a low profile design and short vertical height are required.
continue reading
SAAT 1 Inch (25.4mm) throat 90 x 40 Dispersion Bolt-On Horn Flare ( SH402)
The SH402 is an imported 1” inch throat flat fronted exponential horn flare with a 650 Hz cut off which maintains constant 90 degree horizontal coverage and 40 degree vertical but narrowing the vertical coverage to equalize the high-frequency response. Three bolt mounting options are provided
The SH402 is an imported 1” inch throat flat fronted exponential horn flare with a 650 Hz cut off which maintains constant 90 degree horizontal coverage and 40 degree vertical but narrowing the vertical coverage to equalize the high-frequency response. Three bolt mounting options are provided
continue reading
SAAT 1 Inch (25.4mm) throat 60 x 60 Dispersion Screw-On Flare (SH150)
THE SH150 is an imported compact 1” constant directivity horn flare with a 1600 Hz cut-off and 60° horizontal coverage and 60° vertical coverage. The horn attaches to the driver via a 1- 3/8 18UNEF female screw thread. The horn is manufactured from low mass tough synthetic resin material.
THE SH150 is an imported compact 1” constant directivity horn flare with a 1600 Hz cut-off and 60° horizontal coverage and 60° vertical coverage. The horn attaches to the driver via a 1- 3/8 18UNEF female screw thread. The horn is manufactured from low mass tough synthetic resin material.
continue reading
PAudio1 Inch (25.4mm) throat 90 x 65 Dispersion Bolt-On Flare ( PH170)
The PH-170 is a 1 inch (25.4mm) throat elliptical waveguide high frequency horn. The PH-170 is compatible with bolt on high frequency drivers. The rated coverage pattern is 90 degree horizontal by 65 degree vertical. This compact horn is an excellent choice for 8",10" and 12" two-way systems.
The PH-170 is a 1 inch (25.4mm) throat elliptical waveguide high frequency horn. The PH-170 is compatible with bolt on high frequency drivers. The rated coverage pattern is 90 degree horizontal by 65 degree vertical. This compact horn is an excellent choice for 8″,10″ and 12″ two-way systems.
continue reading
Reviews(0)
There are no reviews yet.