SAAT 1 Inch (25.4mm) throat 90 x 40 Dispersion Bolt-On Flare (SH360) & PH-3616
The SH360 is an imported compact 1” constant directivity horn flare with a 500 Hz cut-off and tight 90° horizontal coverage and 40° vertical coverage. The horn attaches to the driver via standard two and three bolt mounting pattern. The horn is manufactured from low mass tough glass filled ABS resin in matte black finish.
The SAAT SH360 imported horn flare combines wide, vary even horizontal coverage was good low frequency loading and a tight vertical beam pattern. The vertical beam pattern is also equalized to maintain solid horizontal high frequency energy. These features make this horn very suitable for mid-high and high frequency applications in systems designed for use in medium venues where low ceilings can cause unwanted early reflections. The glass-filled ABSs molding and ten bolt front mounting pattern keeps this horn in place in cabinets that do a lot of travelling. The horn finish is matte black and four ribs along each horn wall provide extra rigidity to the horn. there is also continue to the rear flange to help keep heavier help support heavier drivers. The driver flange bolts to both standard 1 inch throat two bolt and three bolt mounting patterns. Extended low frequency coupling down to 550 Hz allows this device to be paired with higher moving mass woofers for better overall system power handling. The SH360 is a good choice for use in two-way systems where a tight pattern control is required.
Specifications
- Throat size: 1″/25 mm
- Dispersion: 90 x 40
- Cutoff frequency: 500 Hz
- Mounting type: Two and Three bolt Mtg.
- Construction: Glass filled ABS Resin
- Net Weight: 0.83 kgm
- Overall width: 360 mm
- Overall height: 160 mm
- Overall depth: 165 mm
Only logged in customers who have purchased this product may leave a review.
SAAT 1 Inch (25.4mm) throat 60 x 60 Dispersion Bolt-On Horn Flare ( SH230)
SH230 is an imported 1 inch throat exponential horn with an 800Hz cut off exhibiting wide 60 x 60 degree coverage therefore suitable for short throw applications. Two and three bolt mounting provided.
SH230 is an imported 1 inch throat exponential horn with an 800Hz cut off exhibiting wide 60 x 60 degree coverage therefore suitable for short throw applications. Two and three bolt mounting provided.
continue reading
PAudio 1 Inch (25.4mm) throat 60 x 40 Dispersion Bolt-On Flare ( SC-1064)
The SC-1064 is an industry standard 1 inch throat design that includes a bolt on style mounting flange. The P Audio SE-1064 is a wide bandwidth constant directivity waveguide with a very controlled by 60° by 40° degree included angle radiation pattern.
The SC-1064 is an industry standard 1 inch throat design that includes a bolt on style mounting flange. The P Audio SE-1064 is a wide bandwidth constant directivity waveguide with a very controlled by 60° by 40° degree included angle radiation pattern.
continue reading
PAudio1 Inch (25.4mm) throat 90 x 65 Dispersion Bolt-On Flare ( PH170)
The PH-170 is a 1 inch (25.4mm) throat elliptical waveguide high frequency horn. The PH-170 is compatible with bolt on high frequency drivers. The rated coverage pattern is 90 degree horizontal by 65 degree vertical. This compact horn is an excellent choice for 8",10" and 12" two-way systems.
The PH-170 is a 1 inch (25.4mm) throat elliptical waveguide high frequency horn. The PH-170 is compatible with bolt on high frequency drivers. The rated coverage pattern is 90 degree horizontal by 65 degree vertical. This compact horn is an excellent choice for 8″,10″ and 12″ two-way systems.
continue reading
1 Inch (25.4mm) throat 80 x 40 Dispersion Screw-On Horn Flare (H-1560)
The H1560 is a compact imported 1” throat screw-on horn flare with an 1100Hz cut-off, 80o horizontal coverage and 40o vertical coverage. The horn flare attaches to the horn driver via a 1 3/8 -18UNEF brass screw insert.
The H1560 is a compact imported 1” throat screw-on horn flare with an 1100Hz cut-off, 80o horizontal coverage and 40o vertical coverage. The horn flare attaches to the horn driver via a 1 3/8 -18UNEF brass screw insert.
continue reading
Reviews(0)
There are no reviews yet.