+61 (03) 9791 5971

Social

×
Your cart is empty.
SAMMI 1 Inch (25.4mm) Bolt on Titanium Horn Driver (SM106)

SAMMI 1 Inch (25.4mm) Bolt on Titanium Horn Driver (SM106)

The SAMMI SM106 is an imported high performance  economical 1″ throat compression type high-frequency driver for use as a high frequency component in professional high quality sound reinforcement and reproduction applications. The SM107 offers exceptional high frequency performance,  high acoustic output 106dB/1W/1m when coupled to the SH350 flare and wide frequency range 500Hz to 16kHz.

Contact Lorantz Audio for purchase, shipping, manufacture and installation information. We ship Australia wide and internationally.
Listed prices do not include taxes, duties or shipping fees.

Categories: ,

The SAMMI SM-106 is an imported high performance 1″ throat, bolt on, titanium  high-frequency compression driver for use in as a high frequency component in professional high quality sound reinforcement and reproduction applications.

The SM-106 offers exceptional high frequency performance, high acoustic output 106dB/1w/1m when coupled to the SH350 flare.     Wide frequency range 800Hz to 17KHz when coupled with SH350 horn flare and  50 watt power handling above 1.5kHz .

When attenuated to a typical sensitivity of 100dBSPL this implies and input power handling at the network input terminals of 200W relative to 2.83v/8-ohm reference.

 This unit must be connected to a system via a frequency selective device the “crossover” which may be passive or active-electronic type.  We recommend a minimum 12dB/octave high- pass filter, refer our computer-aided design filter networks which are designed to meet specific target response, however in demanding applications a higher order network is recommended and necessary. The use of a non-optimized crossover may result in inferior performance.   The diaphragm is terminated with 5mm spade terminals, observe polarity.

This driver is a bolt-on type and three equi-spaced 0.25″20UNC threaded holes on a 57mm PCD are provided. Additionally two 0.25″ -20UNC threaded holes on a 76mm PCD.

Specifications

  • Throat size: 1″/25.4 mm
  • Diaphragm diameter: 1.75 inch (44.4mm)
  • Nominal impedance: 8 ohm
  • Voice Coil DC Resistance: 4.5 ohm
  • Power Handling: 50 watt
  • Sound Pressure Level (1W@1M): 106 dB
  • Frequency range: 500Hz – 16Hz (SH352 horn flare)
  • Mounting Type: Bolt on
  • Mounting threads: 3 x 1/4″ UNC on 57mm PCD
  • Mounting Threads: 2 x 1/4″ UNC on 76mm PCD
  • Magnet: High Quality Ferrite
  • Diaphragm Material: Titanium
  • Recommended Crossover: 1.5kHz or higher((12dB/Oct)
  • Net Weight: 1.7 kgm

Downloads

Reviews(0)

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Call Now Button